Boen Arenasport Sports Flooring

Boen Arenasport Sports Flooring is in the following categories Boen Flooring - Boen Floors

BOEN ARENASPORT

Resilient hardwood flooring system laid onto springbok Semi-sprung battens

INTRODUCTION

BOEN manufactures and distributes a range of hardwood flooring systems including hardwood strip, boards and wood block in a variety of finishes. All hardwoods used are taken from managed sources.

ArenaSport is a factory finished composite engineered board incorporating a 4mm hardwood wear layer. Kiln dried T&G end matched and featuring Connex process, laid onto Springbok semi-sprung battens and the data sheet refers to the various component parts.

Alternative use of the Springbok batten can be found in the BOEN Precisionaire System data sheet.

APPLICATION
BOEN ArenaSport is ideally suited for use as activity flooring in Sports Halls, Squash Courts, Dance Floors and Recreation Halls. Also widely used in Village Halls and Community Centres as well as School Halls and Gymnasia.

All flooring conforms to BS 8201:1987. The Springbok understructure is a registered trade mark (No. 771836). Springbok ArenaSport is tested to and complies with BS 7044 Part 2:1990.

BOEN ArenaSport is available in Beech, Maple and Oak.

BOARD DIMENSIONS
23mm x 139mm x 2200mm length. 6 boards per pack (1.83m²).

BATTEN DIMENSIONS AND APPLICATION
Springbok battens are supplied 46mm x 48mm x 1800mm.
16 battens per bundle.

Alternative sizes can be supplied to suit specific projects.
The Springbok batten can be used with hardwood boards or strip, plywood or flooring grade particle board fixed to overlapping treated joists supported at prescribed intervals by 10mm rubber pads. The rubber pads form a permanent cushion between the floor and the concrete sub floor.
The average weight of the system is approximately 16kg/m².

COMPOSITION AND MANUFACTURE
The understructure is loose laid directly onto concrete or a sand and cement screed. Each of the preservative treated softwood battens is laid in accordance with BS8210:1987. Prefinished.tongued and grooved hardwood boards are secrete-fixed (by nails) at right angles to the direction of the softwood support battens. It is important that the header joint of each board is supported on top of a Springbok batten. An expansion gap is left at the perimeter of the floor to allow for changes in temperature and humidity.

INSULATION

The resilient rubber pads effectively reduce impact sound, which can be further reduced by isolating the floors from the walls and skirting.

The rubber pads provide calculated resilience designed to minimise player fatigue and reduce physiological damage caused by impact. The unique construction of the pads, includes a specially formulated rubber which will not significantly harden or deteriorate over the life of the floor. Alternating air cells are incorporated into the design which permit encapsulated air to be expelled through.

Please contact us on 08700 116 914 for prices.

Related Media

• Product Catalogue (10.75 MB)

Customer Testimonials

"Great company, will use again for flooring products/ Really helpful Cust Service" received from our Online Store.