Bona Carls Flooring Oil 25

Bona Carls Flooring Oil 25 is in the following categories Bona Kemi Oils & Lacquers - Floor Oils And Lacquers - Bona Kemi Oils

The Carl’s Oil range of flooring oils are based on natural Pine oil, the number in the name refers to the solids content of the product. The inspiration behind this range of oils is that there are three steps towards an attractive and long lasting oiled wood floor.

A maintenance oil for use with a floor treated with Carl's oils or other oil systems.
N.B. not suitable for wax-oil systems

• Correct basic treatment where the pores of the wood are thoroughly saturated
• Correct and regular periodic maintenance
• Correct and regular cleaning
• Application: apply using a floor mop, brush or roller.

Carl’s 25 is designed for regular maintenance fo wooden floors treated with Carl's 90 and Carl's 45. By treating the floor with Carl's 25, it will retain its original natural look and become more wear resistant.

• For periodic maintenance
• Dry solids 25%
• Easy to apply and quick drying

Waiting times between coats: 30 - 45 minutes

Coverage: Approximately 20-100m² per litre depending upon species and absorbency of wood and application method

The best way to apply Carl's 25 is with a floor mop however a brush or roller can also be used. As a guide, the surface should be maintained 2 - 3 times per year in public areas with heave wear and 1 - 2 times per year in areas with medium to low wear. In homes, maintenance every third year is normally sufficient.

The floor should be thoroughly cleaned using Carl's Cleaner following the removal of lose dirt and grit. Carl's 25 should be applied to the floor and left for approximately 30 minutes. The surface should then be buffed with a Bona Oil Pad attached to the base of a buffing machinem until an even level of saturation is reached. Apply additional oil if necessary. Surplus oil should be removed by placing an oil cloth under the buffer pad.Any splashes or runs should be removed immediately with a cloth. Allow the floor to dry for 4 - 12 hours then buff with a red pad. If swirl marks appear, or a shiner surface is desired, place an oil cloth under the pad and buff again. Carl's Cleaner should be used for periodic maintenance in the home and for regular cleaning of all oiled wood floors.

Key Points

• The floor must be clean prior to treatment
• An oil pad and oil cloth are required for effective treatment
• A floor buffing machine(preferably 2 speeds) is required for the oil treatment
• As a guide, for heavy wear a surface should be treated about 2-3 times a year, For medium to low wear, 1-2 times a year.
• Refer to the Carl's oil sitework info for greater detail on maintenance

---

Related Media

• Product Catalogue (10.75 MB)
• Bona Carls oil 25 product description (37 KB)
• Bona Carls oil 25 site work (30 KB)
• Bona Carls oil 25 safety sheet (41 KB)

---

You might also be interested in these products

• Bona Carl 45 Flooring Oil - The Carl’s Oil range of flooring oils are based on natural Pine oil, the number in the name refers to the solids content of the product. The inspiration behind this range of oils is that there are three steps towards an attractive and long lasting oiled wood floor.
  
  For areas greater than 70M squared.
• Bona Carl 90 Flooring Oil - The Carl’s Oil range of flooring oils are based on natural Pine oil, containing just 10% solvent. The number in the name refers to the solids content of the product. The inspiration behind this range of oils is that there are three steps towards an attractive and long lasting oiled wood floor.
  
  For use in areas under 70M squared.
• Kitchen Worktops - Solid Oak 3 Metre Lengths 38mm Depth! - CURRENTLY OUT OF STOCK - CURRENTLY OUT OF STOCK- Oak Kitchen Worktops - Oak is the most well-known and widely used timber in the UK, and the first choice for those looking for strength, durability and classic traditional elegance. Oak's rich colour and fine markings lend grace to any kitchen, maturing over the years to add character & warmth.
  
  Discounts are available on these oak worktops for bulk orders, the more you buy the more you save! They Measure 3 metres in length with a depth of 38mm and a width of 600mm.
• Bona Swivelhead Flooring Oil Applicator - Bona - Swivelhead Applicator
• Bona Swivelhead Flooring Oil Applicator Replacement - Bona - Swivelhead Applicator Replacement Sleeve
• Oak Window Sill boards - Solid oak window sill boards, also can be used for stair cladding treading and risers.
• Engineered Brushed and Oiled, 180mm - This Oiled Engineered flooring provides durability with the classic appearance of solid wood.
  This Engineered flooring comes in 180mm Planks with a Brushed finish giving it a rustic and homely appearance.
• Engineered European Oak Unfilled and Unfinished 180mm - Engineered European Oak Unfilled and Unfinished 180mm

Customer Testimonials

"good product,good service" received from our Online Store.